User's Manual

23
User
Manual
Quick Color*
The standalone mode “Quick Color” allows a direct adjustment of the single LED colors
R, G, B, L Dimmer and Shutter.
To adjust your Quick Color please press ENTER to access to main menu (level 1).
While using the UP / DOWN arrows select the menu item “Stand Alone” and conrm
by pressing ENTER. After please select the item “Quick Color” by using the up/down arrows and press ENTER again.
Using UP and DOWN controls, select your desired color and conrm with ENTER.
After you can adjust the brightness for the color between 000-255 and conrm by ENTER.
Besides the individual color mix also a master dimmer for Center- and Halo LED can be adjusted between 000-100.
For strobe effects please adjust the Shutter value between 000-255.
*
Note: Please see detailed explanation for strobe effects inside DMX chart at the end of this manual.
If “Factory Calibration” is selected in “Color Settings” only R,G,B is available here.
Using UP/DOWN arrows at homescreen you can change Quick Color´s dimmer value.
Tunable White*
The standalone mode “Tuneable White” allows the color temperature (CCT) to be adjusted from 2.000K – 10.000K
in 100K steps. Besides brightness and shutter also a +/- green and magenta correction is available.
Menu
Level 1
DMX Mode
Stand Alone
Slave
Settings
System Info
Stand Alone Mode
Level 2
Stop Stand Alone
Auto
Editor
Color Macro
Quick Color
Tunable White
User Color
Timer
Color Settings
Quick Color
Level 3
Dimmer (C) <0-255>
Dimmer (H) <0-255>
Shutter <0-255>
Red (C) <0-255>
Green (C) <0-255>
Blue (C) <0-255>
Lime (C) <0-255>
Red (H) <0-255>
Green (H) <0-255>
Blue (H) <0-255>
Menu
Level 1
DMX Mode
Stand Alone
Slave
Settings
System Info
Stand Alone Mode
Level 2
Stop Stand Alone
Auto
Editor
Color Macro
Quick Color
Tunable White
User Color
Timer
Color Settings
Tunable White
Level 3
CCT <5600>
TINT <000> (+/-127)
Dimmer <0-255>
Shutter <0-255>