User's Manual

25
User
Manual
Timer*
Via the internal timer function, all Stand Alone modes except "Auto" and "Editor" can be conveniently faded in and out
after the function is enabled in the previously activated standalone mode, without the need for an external controller.
Also it remains active even the xture is switched off and restarted. Simultaneously, the timer function is available via
cable as well as via wireless DMX for master & slave operation.
The fade-in time can be set from 0 to 60 minutes, the dwell time from 1 to 24 hours and the fade-out time from 0 to
60 minutes.
To select “Timer” please press ENTER to access to main menu (level 1). While using the UP / DOWN arrows, please
select the menu item “Stand Alone” and conrm by pressing ENTER.
Select the item menu “Timer” by using the up/down controls and press ENTER. Now you can activate / deactivate
the Timer function, select “Fade In”, “Dwell Time” or “Fade Out” for the individual settings and conrm with ENTER.
In each case a three-digit number eld will be displayed. Use UP and DOWN to set the value as required from 000 to
060 minutes for “Fade In” and “Fade Out”, or 001 to 024 hours for the “Dwell Time”. Conrm by pressing ENTER again.
After all time settings have been congured, please activate the timer function by selecting the submenu item “Timer
On/Off” using UP and DOWN, conrm with ENTER, select “On” and conrm with ENTER again.
To disable the timer function, please select “Off” and conrm by ENTER.
*
Note: Please don´t forget to select one of the Stand Alone modes for "Startup Mode" at "Settings".
Color Settings*
Here at “Color Settings” you can chose your preferred working color mode for all Stand Alone color modes. Either
"Color Calibration" or "RAW". Full Calibration of R, G, B and L for a maximum of color consistency from unit to unit.
Please note If this function is activated only RGB is available at User Color and Quick Color. For a maximum of satu-
ration please chose RAW mode.
Menu
Level 1
DMX Mode
Stand Alone
Slave
Settings
System Info
Stand Alone Mode
Level 2
Stop Stand Alone
Auto
Editor
Color Macro
Quick Color
Tunable White
User Color
Timer
Color Settings
Timer
Level 3
Timer <On / Off>
Fade In <0-60 min> 1 minute steps
Dwell Time <1-24h> 1 hour steps
Fade Out <0-60 min> 1 minute steps