User's Manual

25
5.4.3 Slave Mode*
Slave Mode allows same model xtures to be controlled by the “Master” xture via DMX or wireless DMX (CRMX).
The “Master” device should run in Stand Alone mode, all “Slave” devices should set to “Slave”.
To select “Slave” please press ENTER to access to main menu (level 1).
While using the UP / DOWN arrows, please select the menu item “Slave” and conrm by pressing ENTER. Now this
unit is set to “Slave”. Please connect the slave and the master devices (same model) either with a DMX cable or via
wireless DMX and enable one of your preferred standalone mode on the master device. Once the Stand Alone mode is
activated all slave devices will follow the master device. For using Master & Slave function via wireless DMX (CRMX),
please activate CRMX transmit function at Master unit and CRMX receive function at all “Slave” units.
For detailed CRMX information please read chapter “Wireless DMX”.
Note: All devices should use same software version.
5.4.4 Settings
User
Manual
Menu
Level 1
DMX Mode
Stand Alone
Slave
Settings
System Info
Menu
Level 1
DMX Mode
Stand Alone
Slave
Settings
System Info
Menu
Level 1
DMX Mode
Stand Alone
Slave
Settings
System Info
Stand Alone Mode
Level 2
Stop Stand Alone
Auto
Editor
Color Macro
Quick Color
Tunable White
User Color
Timer
Color Settings
Color Settings
Level 3
Color Calibration
RAW