User's Manual

71
User
Manual
0x8040 LED Frequency (PWM) Set
1= 800Hz / 2= 1200Hz / 3= 2000Hz / 4= 3600Hz / 5= 12kHz /
6= 25kHz
0x8010 Fan Mode Set 1= Auto / 2= Silent / 3= Studio / 4= Fan Off / 5= Max. Power
0x8032 Redshift Set 0= Off / 1= On
0x801E Factory Reset Yes/No 0= No / 1= Yes
0x801F User Reset Yes/No 0= No / 1= Yes
0x00C0 Firmware Version read n.a.
0x8700 Serial Number Read n.a.
Sensor 1 LED Temperature read n.a.
0x0400 Device Power on Time read n.a.
0x0401 LED on Time read n.a.
Fan Speed read n.a.
Sensors
RDM enables various readouts for remote device monitoring. See the table below for sensors and sensor types.
Please note: The RDM controller communicates with the xtures to show only the available sensors for this xture.
The table is subject to change without notice.
Name
Temperature xx°C / xxx°F
Software Version SW-Version
Errors