User's Manual

9
4. INSTALLATION & SETUP
4.1 Physical Installation and Rigging
ROXX E.SHOW mini TW+ / E.SHOW mini FC may be installed in any orientation. For this purpose the product provi-
des several options:
Standing:
The xtures yoke with its implemented rubber feet is designed to ensure a secure stand on nearly every plane surfa-
ce with every possible angle/orientation of the lamp s head. Please take care that supporting surfaces are loadable
and stable.
Hanging:
On the bottom the yoke provides 2 Camlock QuickRelease connectors. Here it´s possible to click in the ROXX Omega
Bracket ST (optional accessory) equiped with any suitable clamp.
Insert the two fasteners and turn each 90° clockwise to lock them. Please be sure that the fasterners are turned fully
and snaped in.
A centric hole on the yoke´s bottom (d=13mm / 0,51 inch) provides a mounting point for more rigging options. Next to
it, two additional holes allow the perfect connection of a TV spigot, to use the E.SHOW mini TW+ / E.SHOW mini FC
on a tripod or for example with a superclamp.
User
Manual
open
close