Installation Instructions

27
27
Installing Backband
y Run a bead of PVC
cement along side
edge of window trim.
y Install backband and
fasten using the
fasteners outlined
on page 8.
y Begin by fastening
the apron to the
jamb trim. (It is
typical to use a
wider board for the
apron to result in a
similar apron reveal
below the sill nose.)
y Run a bead of PVC
cement on apron
where sill will be
placed.
y Next, install the sill
nose with screws as
shown.
Washer Head
Screws
Bugle head screws
Installing an Apron
Bugle head screws