Installation Instructions

24
Flashing or
wrap
3
6
”
2
6
”
inside corners
y Inside corner areas should be made weather
resistant in accordance with
building codes, typically
XVLQJÁDVKLQJPDWerial or
house wrap.
y Install the corner board
leaving 1/8” gap between
the corner and any eve.
y Extend corner 1/4”minimum
below sheathing.
y Fasten as described on
page 8.
y Install siding in accordance
with manufacturers
instructions.
Inside corners made with
Conceal boards
y Rip one side down by 1” in
width.
y Run a bead of PVC cement
to glue to two pieces
together.
y Assemble the corner before
installing on the wall using
screws to attach the two
boards together (1). Place
fasteners every 12”-16”
staying 2” from the ends of
the boards
y Install and fasten to the wall
as outlined on page 8 (2).