Technical Specifications

Installation Tips
PAINTING
• Royal Trim & Mouldings require no painting for
protection, but can be painted with 100%
acrylic latex paint to achieve custom colors.
(Scuff sanding will optimize paint adhesion, but is
not required. A second coat may be needed to
achieve desired color.)
• To maintain warranty for custom colors in darker shades, use
heat-reflective paint with VinylSafe
™
Technology from Sherwin-Williams.
(Dark colors are considered any color that falls within the lightness (L)
value of 56 to 0, with 100 being white and 0 being black.)
NOTE: We do not recommend painting the flex of Garage Door Stop.
TOUCH-UP FOR EXTERIOR MOULDINGS
• Dap® “All Purpose” Painter’s Putty®
• Minwax High Performance Wood Filler®
• Elmer’s Fill-N-Finish Light Wood Filler®
• Sherwin-Williams Shrink Free Spackling®
After installation is complete, caulk and/or putty all gaps and nail holes.
CLEANING
• Royal Trim & Mouldings can be cleaned using
any of the recommended household cleaners
listed below; however, glass cleaner has been
shown to be best at keeping the finish intact.
• Recommended cleaners: See list in FAQs.
• Apply the cleaning solution and immediately wipe dry for best results.
• Avoid harsh cleaners with glycol ethers, ethanol type solvents and/or isopropyl
alcohol as they can soften the PVC finish if left on for several minutes.
800.368.3117 29