Installation Instructions

12
Helpful tip for gluing two pieces of PVC trim
Two Part Gluing Method: PVC adhesive along with
Cyanoacrylate (super glue) and activator as a “clamp”
can be used. However,
Cyanoacrylate (super
glue) is insufficient to use alone.
They must be used in
conjunction with PVC
cement. (2P10 is only an
example of a
Cyanoacrylate/Activator
system. There are others.)
Using the two-part
gluing system
• First, place a bead of PVC
cement along one edge of
one of the pieces to be glued.
• Next, place a similar bead of
Cyanoacrylate glue.
• Spray the activator along
the other piece to be glued.
Do not spray the coated
face of the piece.
• Carefully join the two pieces
together making sure that
they are aligned properly.
Hold the pieces in place for
5-10 seconds or until the
Cyanoacrylate glue adheres.
This will allow for installation of
the piece and give sufficient time
for the PVC cement to create
a permanent bond.
10
Helpful tip for gluing two pieces of PVC trim
Ÿ Two Part Gluing Method: PVC adhesive along with
Cyanoacrylate (super glue) and activator as a
“clamp” can be
used. However,
these glues are
not sufficient to
use alone. They
must be used in
conjunction with
PVC cement.
(2P10 is an only
an example of a
Cyanoacrylate/Act
ivator system.
There are others.)
Cyanoacrylate Glue
& Activator
PVC Cement
l
a
t
e
r
y
c
a
o
n
a
y
c
V
P
C
e
C
m
e
n
t
r
e
p
u
S
e
l
u
G
Using the two-part gluing system
Ÿ First, place a bead of PVC
cement along one edge of one
of the pieces to be glued.
Ÿ Next, place a similar bead of
Cyanoacrylate glue.
Ÿ Spray the activator along the
other piece to be glued. Do not
spray the coated face of the
piece.
Ÿ Carefully join the two pieces
together making sure that they
are aligned properly. Hold the
pieces in place for 5-10
seconds or until the
Cyanoacrylate glue adheres.
This will allow for installation of
the piece and give sufficient
time for the PVC cement to
create a permanent bond.
10
Helpful tip for gluing two pieces of PVC trim
Ÿ Two Part Gluing Method: PVC adhesive along with
Cyanoacrylate (super glue) and activator as a
“clamp” can be
used. However,
these glues are
not sufficient to
use alone. They
must be used in
conjunction with
PVC cement.
(2P10 is an only
an example of a
Cyanoacrylate/Act
ivator system.
There are others.)
Cyanoacrylate Glue
& Activator
PVC Cement
l
a
t
e
r
y
c
a
o
n
a
y
c
V
P
C
e
C
m
e
n
t
r
e
p
u
S
e
l
u
G
Using the two-part gluing system
Ÿ First, place a bead of PVC
cement along one edge of one
of the pieces to be glued.
Ÿ Next, place a similar bead of
Cyanoacrylate glue.
Ÿ Spray the activator along the
other piece to be glued. Do not
spray the coated face of the
piece.
Ÿ Carefully join the two pieces
together making sure that they
are aligned properly. Hold the
pieces in place for 5-10
seconds or until the
Cyanoacrylate glue adheres.
This will allow for installation of
the piece and give sufficient
time for the PVC cement to
create a permanent bond.
Cyanoacrylate Glue
& Activator
PVC Cement