Installation Instructions

16
14
Set Goal
Temperature
Ÿ Using the
up/down arrows,
set the
temperature at
275ºF and push
ü.
Set the time at
temperature
Ÿ Using the
up/down arrows
set the time for 8
minutes and
push ü.
Now in “SET” mode
Ÿ You can change
or edit the
settings if
desired by using
the arrows.
Begin heating
Ÿ Push the ü to
begin the heat
process.
Ÿ The controller will
show [RUN].
Ÿ The timer LED
will begin to
blink.
NOTE: Heating Temperatures and times may vary
depending upon material and profile.
14
Set Goal
Temperature
Ÿ Using the
up/down arrows,
set the
temperature at
275ºF and push
ü.
Set the time at
temperature
Ÿ Using the
up/down arrows
set the time for 8
minutes and
push ü.
Now in “SET” mode
Ÿ You can change
or edit the
settings if
desired by using
the arrows.
Begin heating
Ÿ Push the ü to
begin the heat
process.
Ÿ The controller will
show [RUN].
Ÿ The timer LED
will begin to
blink.
NOTE: Heating Temperatures and times may vary
depending upon material and profile.
14
Set Goal
Temperature
Ÿ Using the
up/down arrows,
set the
temperature at
275ºF and push
ü.
Set the time at
temperature
Ÿ Using the
up/down arrows
set the time for 8
minutes and
push ü.
Now in “SET” mode
Ÿ You can change
or edit the
settings if
desired by using
the arrows.
Begin heating
Ÿ Push the ü to
begin the heat
process.
Ÿ The controller will
show [RUN].
Ÿ The timer LED
will begin to
blink.
NOTE: Heating Temperatures and times may vary
depending upon material and profile.
14
Set Goal
Temperature
Ÿ Using the
up/down arrows,
set the
temperature at
275ºF and push
ü.
Set the time at
temperature
Ÿ Using the
up/down arrows
set the time for 8
minutes and
push ü.
Now in “SET” mode
Ÿ You can change
or edit the
settings if
desired by using
the arrows.
Begin heating
Ÿ Push the ü to
begin the heat
process.
Ÿ The controller will
show [RUN].
Ÿ The timer LED
will begin to
blink.
NOTE: Heating Temperatures and times may vary
depending upon material and profile.
NOTE: Heating temperatures and times may vary
depending upon material and prole.
Set Goal
Temperature
• Using the up/down
arrows, set the
temperature at 275
o
F
and push the √ key.
Set the time at
temperature
• Using the up/down
arrows, set the time
for 8 minutes and
push the √ key.
Now in
“SET” mode
• You can change or
edit the settings if
desired by using the
arrows.
Begin heating
• Push the √ key
to begin the heat
process.
• The controller will
show “RUN.”
• The timer LED will
begin to blink.