Installation Instructions

17
15
End of the heating cycle
Ÿ The timer will sound an audible alarm when the
heating cycle is complete.
Ÿ Push the ü to silence the alarm.
WARNING!
Ÿ The heaters will remain on.
Ÿ The material will be hot and should only be
handled using heat resistant gloves.
Check consistancy
Ÿ The material should
feel like cooked
spaghetti. If not,
return to heating and
continue checking
every 2 minutes.
Ÿ Place one end of the softened material along
the form.
Ÿ Clamp end to hold in place.
15
End of the heating cycle
Ÿ The timer will sound an audible alarm when the
heating cycle is complete.
Ÿ Push the ü to silence the alarm.
WARNING!
Ÿ The heaters will remain on.
Ÿ The material will be hot and should only be
handled using heat resistant gloves.
Check consistancy
Ÿ The material should
feel like cooked
spaghetti. If not,
return to heating and
continue checking
every 2 minutes.
Ÿ Place one end of the softened material along
the form.
Ÿ Clamp end to hold in place.
End of the heating cycle
• The timer will sound an audible alarm when the heating
cycle is complete.
• Push the √ key to silence the alarm.
Check consistency
• The material should
feel like cooked
spaghetti. If not,
return to heating and
continue checking
every 2 minutes.
• Place one end of the softened material along the
form.
• Clamp end to hold in place.
WARNING!
• The heaters will remain on.
• The material will be hot and should only be handled
using heat resistant gloves.