Installation Instructions

19
17
Water Tables
Ÿ Make sure that the wall is made weather resistant
consistent with building codes. If no wrap is used,
flash a minimum of 10” up from the bottom,
hanging the flashing at least 1/4” over the bottom
of the sill plate.
Ÿ Install the water table as shown below using
weather resistant screws at 8-12” intervals.
Ÿ Install flashing at seams as shown.
Siding Panel
wrap or
flashing
Standard
Water Table
Trim Board
up to 1””
Stone
Water Table
10”
10”
Flashing Seams
Water Tables
• Make sure that the wall is made weather resistant
consistent with building codes. If no wrap is used, flash a
minimum of 10” up from the bottom, hanging the flashing
at least
1
/
4
” over the bottom of the sill plate.
• Install the water table as shown below using weather
resistant screws at 8-12” intervals.
• Install flashing at seams as shown.
Flashing Seams
Siding Panel
Wrap or
Flashing
Stone
Water Table
Standard
Water Table
Trim Board up
to 1”
16” O.C. Max.