Installation Instructions
20
18
Skirtboard
Conceal
Skirt Board
Siding Panel
wrap or
flashing
Ÿ Make sure that the wall is made weather resistant
consistent with building codes. If no wrap is used,
flash a minimum of 10” up from the bottom,
hanging the flashing at least 1/4” over the bottom
of the sill plate.
Ÿ Install the skirt board as shown below securing it
the same as a trim board (page 8).
Ÿ If a drip cap is used, glue the cap onto the board.
18
Conceal
Skirt Board
Siding Panel
wrap or
flashing
Skirtboard
• Make sure that the wall is made weather resistant
consistent with building codes. If no wrap is used, flash a
minimum of 10” up from the bottom,
hanging the flashing at least
1
/
4
” over the bottom of the sill
plate.
• Install the skirt board as shown below securing it the same
as a trim board (page 8)
• If a drip cap is used, glue the cap onto the board.
Siding Panel
Wrap or
Flashing
16” O.C. Max.
Conceal
Skirt Board
Conceal
Skirt Board
16” O.C. Max.
Wrap or
Flashing
Siding Panel