Installation Instructions

35
New Contstruction Window Surround
New Construction Window Surround can be used in many
areas for trim but is particularly useful around windows with a
nailing flange (Figure 1.). It is recommended that the window
surround be assembled prior to its application around the
window. When measuring for the surround, measure to leave
a 1/16” space between the surround and the window on all
sides to allow for expansion and contraction of the trim thru
temperature changes.
• Window trim should be fastened to the wall using
fasteners outlined on page 8.
• Install head flashing inside the pocket of the header
trim.
Squared Off Corners
• Remove any material necessary to allow the Channel to
continue completely around the window (Figure 2.).
• Use the integrated pocket on the back of the trim to
secure the corners using weather resistant screws (Figure
2.).
Mitered Corners
• Miter and assemble as shown in Figure 3 using weather
resistant screws.
35
New Construction Window Surround can be used in many
areas for trim but is particularly useful around windows
with a nailing flange (Figure 1.). It is recommended that
the window surround be assembled prior to its application
around the window. When measuring for the surround,
measure to leave a 1/16” space between the surround
and the window on all sides to allow for expansion and
contraction of the trim thru temperature changes.
Ÿ Window trim should be fasten to the wall using the
fasteners outlined on page 8.
Ÿ Install head flashing inside the pocket of the header
trim.
Squared off corners
Ÿ Remove any material necessary to allow the Channel to
continue completely around the window (Figure 2.).
Ÿ Use the integrated pocket on the back of the trim to
secure the corners using weather resistant screws
(Figure 2.).
Mitered Corners
Ÿ Miter and assemble as shown in Figure 3 using weather
resistant screws.
New Construction Window Surround
Fig. 1