Installation Instructions

37
37
Garage Door Stop
Approx. ½”
Ÿ Install the jamb
pieces first, then
the header.
Ÿ Position the stop so
the weather strip is
in contact with the
garage door. The
inside of the stop’s
base will be
approximately ½”
from the garage
door.
Ÿ Fasten the stop in
place with color
coordinated
galvanized or
stainless steel trim
nails in the pre-
punched holes or at
approximately 8”
intervals.
Ÿ Trim the weather
stripping on the
header piece to
create a mitered
look and help keep
a continuous seal.
37
Garage Door Stop
Approx. ½”
Ÿ Install the jamb
pieces first, then
the header.
Ÿ Position the stop so
the weather strip is
in contact with the
garage door. The
inside of the stop’s
base will be
approximately ½”
from the garage
door.
Ÿ Fasten the stop in
place with color
coordinated
galvanized or
stainless steel trim
nails in the pre-
punched holes or at
approximately 8”
intervals.
Ÿ Trim the weather
stripping on the
header piece to
create a mitered
look and help keep
a continuous seal.
Garage Door Stop
• Install the jamb pieces first, then the header.
• Position the stop so the weather strip is in contact with
the garage door. The inside of the stop’s base will be
approximately 1/2” from the garage door.
• Fasten the stop in place with color coordinated
galvanized or stainless steel trim nails in the pre-
punched holes or at approximately 8” intervals.
• Trim the weather stripping on the header piece to
create a mitered look and help keep a continuous seal.