Service manual

05-17
✰ Remove rocker shaft return spring
pivot pin with “O” ring by using
special No. ST 25123-4 Extractor for
5 speed gear box pivot pin as shown
in Fig.
✰ Remove the two bolts and remove the
rocker shaft upper pivot bearing
with “O” ring.
✰ Remove the two screws holding the
lower pivot bearing ..
✰ Remove the rocker shaft assembly
by gently tilting and twisting out.
✰ Remove nut and lock washer.
✰ Straighten lock tab and Unlock the
FD sprocket nut.
Engine Dismantling, Inspection & Assembly