Service manual

05-20
✰ Remove gear lever shaft bush and oil
seal.
COMPONENTS FOR DISMANTL-
ING FROM CRANKCASE LH
REMOVAL OF CLUTCH ASSY.
✰ Remove clutch push pad, ball bearing
& bearing retainer cup.
✰ Use Special tool No. ST - 25591-4
Clutch centre nut holding tool to
lock Clutch outer sprocket and
engine drive sprag clutch.
✰ Remove auto chain tensioner bottom
bolt,“O”ring. and its spring. Unlock
clip and press push rod to slacken
duplex chain.
✰ Remove nyloc nut & plain washer.
✰ Remove 17mm Hex bolt on the
Engine sprocket.
Engine Dismantling, Inspection & Assembly