Service manual

05-53
✰ Use Special tool No. ST - 25594-4
Clutch spring compressing tool to
compress the clutch springs over
spring holder and tighten with 2
long bolts.
✰ Assemble the 4 clutch holding bolts
bolts and tighten diagonally and
evenly.
NOTE :NOTE :
NOTE :NOTE :
NOTE : Tighten bolts diagonally and
evenly 5 threads each (Torque 1 KG-M).
✰ Remove the 2 long bolts and the
special tool. Fix the 2 hex bolts.
✰ Assemble Duplex chain over Engine
sprag clutch sprocket and Clutch
assembly. Mount on main shaft.
✰ Fix 17 mm hex head bolt with washer
on sprag clutch assy. (Torque 4.8
KG-M).
✰ Use Special tool No. ST 25591-4
Clutch centre holding tool to lock
Clutch sprocket and engine sprag
clutch assy.
Engine Dismantling, Inspection & Assembly