Service manual

05-57
✰ Assemble oil pump on Crank case RH
and tighten with 4 allen screws
(Torque 0.35 to 0.6 KG-M).
CAUTION : Ensure "O" ring is located on
the oil pump body outlet.
✰ Fix the woodruff key carefully on
Crankshaft.
✰ Assemble Gear lever shaft assembly
into RH Crank case window and then
fix gear shaft spacer.
✰ Locate the actuating pin in the
Exhaust cam.
NOTE : Ensure spring eyelet is seated
properly inside flyweight hole.
✰ Lubricate and ensure free movement
of the returning of the flyweight.
✰ Assemble the flyweight along with
return spring over activating pin
and tighten with allen screw.
ASSEMBLING PROCEDURE OF
AUTO DECOMPRESSOR
Engine Dismantling, Inspection & Assembly