Service manual

05-59
✰ Fix Cam steady plate and check for
axial play of Cam Gears to avoid noise
problem.
✰ Assemble the dowels and allen
screws on Cam steady plate and
tighten (Torque 1 KG-M).
✰ Assemble magneto rotor, plain
washer and nut and tighten (Torque
4.8 KG-M).
NOTE :
Use special tool No. ST 25592-4 to
lock connecting rod movement during
tightening magneto nut.
✰ Fix oil seal 2 Nos. at Kick Shaft hole
on Crank case RH cover.
✰ Fix breather chamber gasket.
OUTSIDE OIL SEAL
INSIDE OIL SEAL
✰ Assemble 6 allen screws to fix
breather chamber cover plate
(Torque 0.60 KG-M).
Engine Dismantling, Inspection & Assembly