Service manual

05-68
✰ Similarly follow the same process to
assemble the exhaust Valve as
shown in Fig.
VALVE LEAKAGE TEST
✰ Pour solvent into exhaust port and
check for valve seat leakage if any.
NOTE:
Please ensure split collars are locked on
the valve stem groove by tapping gently
with a plastic hammer on retainer spring.
✰ Similarly check for inlet valve seat
leakage.
✰ Assemble the Cylinder head assy.
on the Barrel.
✰ Tighten the 6 flanged hex nuts
diagonally and evenly.
✰ Assemble the spark plug
✰ Check run out of the push rods.
Engine Dismantling, Inspection & Assembly