Service manual

05-69
✰ Assemble inlet and exhaust
pushrods.
✰ Assemble the inlet and exhaust
rocker bearing with dowel and
tighten allen screws
✰ Assemble the Inlet & Exhaust
Rocker covers, dowels & rubber
gasket then tighten rocker cover bolt
with rubber washer (Torque 1 KG-
M)) .
✰ Assemble tappet door by applying
LOCKTITE 5699 RTV silicon gasket
on Crank case RH then tighten
screws (Torque 0.60 KG-M).
✰ Tighten the swing arm nut to
specified torque.
Engine Dismantling, Inspection & Assembly