Service manual

06-5

FUEL INJECTOR

Specification:Specification:

Specification:

Operating Voltage : 10 – 14 V.

Operating temperature : –30º C to + 120º C.

Fuel Injection pressure : 294 kpa (2.9 bar)

Solenoid Operating Resistance : 10.3 ± 0.5 Ohms

Fuel Injector is a solenoid operated electromagnetic valve, which atomizes the fuel by

forcing it through a small nozzle under high pressure. The injection system used is a

timed injection system and the injection is done close to the inlet valve. The injector

operates based on the pulse width signal given by the ECU. The fuel injector is as-

sembled in the inlet manifold located between the inlet port on the cylinder head and

air filter. It is placed at an angle in the intake manifold so as to give maximum fuel

spray and minimum wall wetting.

THE ADVANTAGES OF FUEL INJECTION ARE :

✰ Excellent cold starting

✰ Consistent idling RPM

✰ Good acceleration

✰ Full power output

Exploded view of fuel

injector

Assembled between throttle

body and cylinder head

Function of Components in EMS