Service manual

08-16
✰ Install the Pad tension spring plate
into the Caliper body.
✰ Assemble Bleed screw with the dust
cap on the caliper body.
✰ Assemble the Mounting Bracket on
the caliper Body.
✰ Smear fresh brake fluid on the
caliper boot and bellow and
assemble them as shown.
✰ If the Caliper Boot and Bellow are
hard or deteriorated, replace them
with new ones.
✰ Coat the caliper cylinders and
Pistons with clean brake fluid and
install the Pistons into the caliper
body with the dished end facing
inwards.
Chassis, Wheels & Brakes