Service manual

09-8
✰ Tap and pull out the swing arm
flange hex bolt.
✰ Remove the chain guard.
✰ Remove the swing arm cap swing
pivot.
✰ Remove the swing arm hex nyloc nut
& washer.
✰ Using a mandrel, drive out the plastic
bush from either sides of the swing
arm and remove the steel spacer.
BUSH
SPACER
BUSH
CAUTION :
Do not remove plastic bush, unless it is
defective.
✰ Always use reamer to ream the bush
after pressing into swing arm tube.
Suspension & Steering
ASSEMBLY
✰ Press the new plastic bush into the
swing arm tube.