Service manual

03-3
New Min.
New Max.
Service Limit
Piston ring end gap : compression
Piston Pin diameter
19.992 19.992
19.997 19.997
19.982 19.982
From top 1st 2nd 1st 2nd
New Min. 0.20 0.35 0.15 0.20
New Max. 0.35 0.50 0.3 0.4
Service Limit 0.70 0.85 0.6 0.7
Piston ring end gap - Oil Ring Big end axial play
Crank shaft : Run out
Small end bore inner diameter
Service Limits of Components (All units in mm unless specified)
Classic 500 Classic 350
Classic 500 Classic 350
New Min.
New Max.
Service Limit
0.20 0.20
0.70 0.70
0.90 0.90
Classic 500 Classic 350
New Min.
New Max.
Service Limit
0.20 0.20
0.55 0.55
0.65 0.65
Classic 500 Classic 350
New Min.
New Max.
Service Limit
20.007 20.007
20.016 20.016
20.046 20.046
Classic 500 Classic 350
New Min.
New Max.
Service Limit
0.00 0.00
0.04 0.04
0.08 0.08
Classic 500 Classic 350