Service manual

03-16
✰ Turn the adjuster cams on both sides
till 25 to 30 mm chain slackness is
achieved
✰ Check and ensure that the number
of notches from the punch mark on
the cam to the notch resting on the
pin are equal on both sides.
✰ Rotate the wheel and apply brake and
tighten all the nuts and lock the split
pin.
BRAKE CAM GREASING
(EVERY 6,000 KMS)
✰ Remove the brake cover plate.
✰ Clean the brake cam and apply
grease.
✰ Refit the cover plate.
BRAKE PEDAL PLAY ADJUSTMENT
PEDAL FREE PLAY 20 TO 30 MM
✰ Turn in/out the adjuster nut for
correct pedal play
REAR BRAKE SWITCH
ADJUSTMENT
✰ Loosen bottom nut and tighten top
nut till the brake light comes on
when brake pedal is pressed.
✰ Tighten the bottom nut duly
ensuring that the brake lamp is not
glowing continously.
✰ In case brake light is continously
glowing then readjust till correct
position in achieved.
Periodical Maintenance