Service manual

05-8
CYLINDER HEAD ASSEMBLY
✰ Remove the 4 allen screws along with
rubber seals from Inlet and exhaust
rocker covers.
✰ Remove the Inlet & Exhaust Rocker
cover, dowel & rubber gasket.
ENGINE OIL DRAIN
Always best to drain the engine oil in
warm condition.
✰ Remove the 2 Flanged hex bolts.
Remove the drain cap with ‘O’ ring.
✰ Remove suction filter.
✰ Remove the magnetic drain plug
with washer.
✰ Remove the 4 allen screws each on
the rocker bearing inlet & exhaust.
✰ Remove the inlet and exhaust rocker
bearing with dowel and rocker arm.
Magnetic Drain Bolt
Engine Dismantling, Inspection & Assembly