Service manual

05-11
NOTE : Carefully remove the piston rings
from the piston without deforming.
✰ Remove Cylinder barrel bottom
Gasket.
✰ Use Special tool No. ST - 25592-4 to
hold connecting rod as shown Fig.
REMOVAL OF COVER RH SUB
ASSEMBLY :
✰ Remove kickstarter lever.
✰ Remove oil filter cover bolts.
CAUTION : Care must be taken while re-
moving cover due to spring force.
✰ Remove oil filter cap, “O”ring &
Spring.
✰ Remove the 3 “O” rings, Oil filter
element spring cap, washer & Oil
filter element.
Engine Dismantling, Inspection & Assembly