Use and Care Manual

3
l
10
Table Assembly (continued)
Once all of the bolts are in place, fully tighten all the bolts by using the hex wrench (CC).
Turn the table right side up and ensure all connections are secure.
Carefully place the umbrella cover (H) to the table top (D).
ADDING THE UMBRELLA COVER TO THE TABLE TOP
Care and Cleaning
For best results, clean the dining set with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Keep the dining set away from fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
Store the dining set in a dry, sheltered place when not in use.
Do not clean with abrasive materials, bleach, or solvents.
H
D