Assembly Instructions Model No. FTS90042G 42”x75” Steel Mesh Rectangle Table Questions, problems, or missing parts? Before returning to the store, call Customer Service. 1-866-988-3300 8 a.m. - 5 p.m., PST Monday - Friday Retain this manual for future use.
Contents Safety Instructions 3 Parts List 4 Assembly 5 Cleaning & Maintenance 7 Warranty 8 IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.
Safety Instructions WARNING Please keep children out of the assembly area before assembly. WARNING Never use this product as support. Do not shake, lean, or climb on the product at any time. WARNING Do not place heavy objects on the table top. WARNING This dining set unit is heavy, and may require two adults for safe assembly. WARNING Do not locate the product near any heat source.
Parts List A Table top - 1 AA Bolt - 8 B Table leg - 4 BB M6x45 screw - 4 C Table ring - 1 CC Bolt cap - 8 DD Flat washer - 12 EE Screw cap - 4 FF Allen wrench - 1 GG Wrench - 1 FTS90042G
Assembly STEP 1 Requires: AA, BB, CC, DD, EE, FF, GG, A, B, C Line up the bolt holes on the table leg (B) with the corresponding bolt holes on the table ring (C). Screw the M6x45 screw (BB) with flat washer (DD) and screw cap (EE) using the Allen wrench (FF). Then tighten the bolt (AA) and flat washer (DD) with bolt cap (CC) by using the wrench (GG). *Reminder - Do not completely tighten screws and bolts yet. Repeat this step until all the table legs (B) are connected to table ring (C).
Assembly STEP 2 Requires: AA, CC, DD, GG, A, B Screw the bolt (AA) and bolt cap (CC) with flat washer (DD) by using the wrench (GG). *Reminder - Do not completely tighten bolts yet. Repeat this step until all the table legs (B) are connected to the table top (A). Then tighten the bolts. Return table to upright position onto a flat surface. You are now ready to enjoy your new table.
Cleaning & Maintenance • For best results, clean the frame with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. • Do not clean with abrasive materials, bleach, or solvents. • Store the table in a dry, sheltered place when not in use. • Keep the table away from fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
Warranty Outdoor Furniture IMPORTANT If you have any problems with this product (missing or damaged parts, assembly issues, etc.), PLEASE DO NOT RETURN TO THE RETAILER/STORE from where you purchased the product. Please call our Toll-Free Customer Service Hotline at: 1-866-988-3300 To expedite any future warranty claims, please retain the instruction sheet, warranty card and receipt for future use. Care and Maintenance Store furniture in an upright position.
Warranty Outdoor Furniture 3 YEAR ALUMINUM / 1 YEAR STEEL LIMITED WARRANTY PROGRAM For a period of three (3) years for aluminum and one (1) year for steel after date of purchase, the Manufacturer will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between the Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase.
