Use and Care Manual

Page 2 of 13
WARNING
● Applying too much propane may result in gas pooling and will not burn.
Allow fresh air into the unit so that the remaining gas may escape.
● Use LP propane tanks with the following dimensions: diameter 12 inches,
height 18 inches, capacity 20 lbs.
●
You must use a propane tank that has a collar to protect the gas valve.
● DO NOT fill tank over 80 Percent full.
● The LP gas tank must have a listed overfilling prevention device and a
QCCI or Type I, (CGA810) LP gas tank connection.
● The gas supply tank should be constructed and marked with the
specifications for the LP gas tanks of the U.S. Department of Transportation
or the National Standard of Canada CAN/CSA-B339, LP gas tanks, spheres
and tubes for Transportation of Dangerous Goods and Commission.
● Discontinue use if any part of the propane tank is damaged. Rust and
dents may be hazardous and should be inspected by a gas supplier.
● The installation of this unit must adhere to local codes or either the
National Fuel Gas Code, ANSI Z223. 1/NFPA54, OR CAN/CGA- B149.1,
National Gas and Propane Installation Code.
● This unit is to be used with propane gas only! (sold separately), is
not intended for natural gas.
● Do not use any solid fuel or charcoal for this unit.
● Do not use any more than 1/4in depth lava rocks/ pumice stones/
Lava Glass above the burner holes. Doing so will suffocate the flame.
WARNING
Warnings