Use and Care Manual

Page 7 of 13
Step 5:
Locate the battery, remove the plastic cover
first. Unscrew the rubber cap of the Electric
Ignitor, place a AAA battery into the battery
case. Make sure the positive pole ("+") towards
the cap.
Screw the cap back to the battery case tightly.
Step 7:
DO NOT COVER THE IGNITION SCREEN
when placing the lava rock into the fire bowl.
Always keep Ignition SCREEN visible.
** Connect the Pressure-Regulating Valve to
the gas tank.
Step 8:
Turn the cylinder valve clockwise to close
the gas supply on the gas tank.
Assembly Instructions
Step 9:
Screw Regulator Coupling clockwise
by hand only. Make sure it is fastened.
Step 6:
Place the lava rock averagely in the fire bowl on
the top of the firebowl.
NOTICE: * Do not place lava rocks on the screen.
* The burner of the firebowl must be
covered by lava rocks completely.
FRUUHFW
LQFRUUHFW
- +