Model: SG4003 Stainless Steel 4-Burner Gas Grill With Infrared Rear Burner hotline www.royalgourmetusa.
13 18 19 21 22
hotline. or hot.
d areas.
25 24 23 21 22 20 19 18 17 16 12 15 11 13 14 10 9 8 7 6 5 3 3 2 4 1 4 26 27
Caster Cart beam 4pcs Bottom shelf 1pc Side shelf 2pcs Cart joint 2pcs 1pc Right door 1pc 1pc Right cart joint 1pc Left cart joint Door handle 2pcs Handle base 4pcs Right door joint 1pc Left door joint Side table decoration 2pcs Side burner 1pc Side table Electrode Rear burner board 3pcs Grease cup 1pc Flame tame 4pcs 26 Cylinder holder A 1pc Bolt B M4x8 1pc 1pc 1pc Left door 1pc Main body 1pc Rear board 1pcs Bolt A M5x10 55pcs 1pc 6pcs Bolt C M4x10 8pcs Base D 1p
2 3 A 1 A Assemble the caster (1) to the bottom shelf (2) with 16 bolts (A) as shown. 4 Assemble the side shelves (3) to the bottom shelf with 6 bolts (A). A 5 A A B K K 26 27 E Assemble the cart joint (4) to the bottom shelf and side shelf with 8 bolts (A). Assemble the rear shelf (5) to the bottom shelf with 5 bolts (A). Assemble the cylinder holder A and B (26,27) with 4 bolts (K). Assemble the magnet (E) to the bottom shelf with 2 bolts (B).
A A 8 6 C C 7 Assemble the cart back beam (6) to side shelves with 6 bolts (A) and 2 bolts (C) as shown. Assemble the right cart joint (7) to right shelves with 3 bolts (A) and 1 bolts (C). Assemble the left cart joint (8) to left shelves with 3 bolts (A) and 1 bolts (C). D 10 9 11 K 12 Assemble the door handles (11) handle bases (12) to left and tight door with 4 bolts (K) Screw 4 (D) underneath the doors (9.10). Insert the door spindle into the bottom shelf.
15 C I A 13 14 Assemble the right left door joint(13,14) above the door with 4 bolts(c) as shown. Please note: release the hose of the side burner and regulator under the control panel using scissors. Then place the main body(15) to the cart, fasten the right side of main body to cart brace with 4 bolts(A) and 4 bolts(I) . J 16 17 J 18 16 I Assemble the side table decoration (16) to the side burner shelf(17) and side table(18) with 8 bolts(J).
A F 2 1 Fasten the side table to the main body with 4 bolts (A) as shown. Connect the ventilator tube of the side burner to the main body and fasten it with pin (F). 19 B Insert the ignition line to the electrode hole as shown. Assemble the rear burner electrode (19) to firebox with 1 bolt (B).
20 G Connect the ignition with the back burner as shown. Assemble the rear burner (20) to firebox with 2 bolt (G). B 21 H Connect the tube terminal to the rear burner, ensure it with nut (H). Assemble the rear burner board (21) to firebox with 3 bolt (B).
21 22 23 22 Attach the grease cup (22) to grease tray. Place the flame tamers (23) onto the main burners. . 23 24 24 25 Place the cooking grates (24) onto the main body. Place the warming grates (25) onto the main body.
cleaning products metrics
regulator er regulator at all times.
36" 36"
grill
service@royalgourmetusa.
