Installation & Assembly

ManualsBrandsRoyal Home Showers ManualsBathroom Remodel & Bathroom Fixtures38" W x 81" H Framed Round Sliding Shower Enclosure with Seat, Towel Bar and Base Included

Shower & Bath Enclosure

Installation Instructions

Thank you for purchasing Royal Home Showers’ products. We are committed to providing our

customers with high quality products at a competitive price.

Please read all instructions carefully before and during installation.

Professional help is required for installation.

These installation instructions should be used as a guideline. Your specific shower or bath

enclosure may differ from the figures shown in these instructions. This instruction is for

shower models as follows: S-3535, S-3838, S-1615, S-3232, S3636, S-4040, S-4848 and SE-

3460.

Additional Installation Tools:

3” Dry wall screws

Silicone sealant

Phillips head screw driver

Flat head screw driver

The shower is delivered in a wood crate with carton box contents as follows:

1.S-3535 (4 boxes total): front glass panels (2) and glass doors (2), center seat plastic

fiberglass panel (1), back wall panels (2), base (1) and hardware

2.S-3838(4 boxes total): front glass panels (2) and glass doors (2), center seat plastic

fiberglass panel (1), back wall panels (2), base (1) and hardware

3.S-1615(4 boxes total): front glass panels (2) and glass doors (2), function panel (1),

back wall panels (2), base (1) and top (1) with hardware

4.S-3232(3 boxes total): front glass panels (2) and glass doors (2), back wall panels (2),

and base (1) with hardware

5.S-3636(3 boxes total): front glass panels (2) and glass doors (2), back wall panels (2),

and base (1) with hardware

6.S-4040(4 boxes total): front glass panels (2) and glass doors (2), function panel (1), back

wall panels (2), base (1) and top (1) with hardware

7.S-4848(4 boxes total): front glass panels (2) and glass doors (2), function panel (1),

back wall panels (2), base (1) and top (1) with hardware

8.S-3460(4 boxes total): front glass panels (2) and glass doors (2), function panel (1),

back wall panels (2) and side panels (2), base (1) and top (1) with hardware

Hardware included:

1.Drain with flexible hose if you ordered 1-1/2” drain. It doesn’t come with a drain piece

or flexible hose if you ordered 2” drain. You can buy 2” drain at a hardware store.

Summary of content (11 pages)

PAGE 1
Shower & Bath Enclosure Installation Instructions Thank you for purchasing Royal Home Showers’ products. We are committed to providing our customers with high quality products at a competitive price. Please read all instructions carefully before and during installation. Professional help is required for installation. These installation instructions should be used as a guideline. Your specific shower or bath enclosure may differ from the figures shown in these instructions.
PAGE 2
.Foot massager with mounting balls if your model ordered has this function. Flexible water hose for the foot massager and through-wall elbow, washers and a ring nut. 3.10 cup washers and decorative chrome covers 4.1”, ½”, and 1/4" long screws 5.Glass shelf and its mounting bolts, washers, and nuts 6.Shower head sliding bar and its mounting bolts, washers and nuts. 7.Flexible water hose for hand-held shower and through-wall elbow, washers and a ring nut. 8.Hand-held shower head 9.8 door rollers 10.
PAGE 3
. Glass Frame Assembly a. Connect curved (or straight) rails to the vertical stiles with two metal screws as shown by the illustration. b. The bigger rail is on top c. For showers with a straight front corner (e.g. S-39), two straight rails are jointed at the corner with the L shaped corner connectors d. For all models, fixed glasses are already installed to stiles when delivered. 4. Glass Panel Installation Install fixed glass panels to the door frame as shown by the illustration.
PAGE 4
. Glass Panel Installation Install fixed glass panels to the door frame as shown by the illustration. For all models, fixed glasses are already installed to stiles when delivered. Therefore, go through steps 4, 8,and 9, to have the fixed glasses secured to the rails.
PAGE 5
. Glass Door Assembly a. Install the door rollers as shown by 6, but not to tight them yet. b. Locate handle holes on the doors and install water seal strips with magnets (dark brown) on the edges near the door handles and clear strips (4) to the other edges as shown by the illustration.
PAGE 6
. Back wall Assembly a. Install glass shelf, hand-held sliding bar or mounting bracket, towel bar if applicable, foot massager if applicable, soap/shampoo dispensers if applicable, mirror if applicable, through-wall elbows to back walls through pre-drilled holes. b.
PAGE 7
Through-wall elbow installation Shampoo dispenser installation Hand-held shower Hand-shower head mounting hook 7
PAGE 8
For some models, water supply are done “through-wall elbow” Hand-held shower Head sliding bar 7. Glass Door Installation a. Put rollers on top of the doors into the top rail first. b. Then put the rollers on the bottom into the bottom rail. c. Tighten the rollers. d.Use a wrench to turn the plastic (offcentered) hex nuts to line up doors (6). e. Install the door handles. f. Install the magnetic door seals to the front edges of the doors. g.
PAGE 9
Door roller in top track Door roller in lower track (31 stands for glass) 9
PAGE 10
8. Unit Assembly a. Connect the front frame with two side-back walls. For some of the models, the ½” stainless steel screws must be put on from the backside of the shower. Therefore, this connection must be done off the shower base. Have doors removed from the front frame. b. For model S-3232, S-3636, S-3535, and S-3838, connect water supply to the shower. You may need to move the front-frame-backwall assembly onto the base but leave enough room for water connections. c.
PAGE 11
9. Unit installation a. Connect and secure all water lines to the shower/bath enclosure. Make sure all connections are water tight! If your unit comes with a built-in radio, plug it into a 120V outlet. b. Match up the electrical wire connectors (by pictures on the tags) for LED lights, speaker, and fan. (The DC powers both lights If your unit has both dome and panel LED lights.) c.You may apply silicone sealant to the outer edge of the base to secure the unit to the wall. d.