User's Manual
~ 6 ~
Figure 6 brightness and contrast Adjustment
Contrast
OSD window off Press+into the contrast adjustment window of
OSD message as figure6. Press+to increase or- to decrease the
contrast level.
GEOMETRY :
-V-size
Repeatedly press < or > until the
symbol changes color. Press + to
increase or – to decrease the vertical size of the display.
-V-position
Repeatedly press < or > until the symbol changes color. Press + to
move up or – to lower the vertical position of the display.
-H-width
Repeatedly press < or > until the symbol changes color. Press + to
increase or – to decrease the horizontal width of the display.
-H-position
Repeatedly press < or > until the symbol changes color. Press + to
move screen rightward or – to move screen leftward.
-Pincushion
Repeatedly press < or > until the symbol changes color. Press + or –
until the display edges neither bulge out (barrel) nor pull in (pincushion).
-Trapezoid
Repeatedly press < or > until the symbol changes color. Press + or –
until the display does not slant (trapezoid distortion).