User's Manual
~ 7 ~
OSD message as figure6. Press+ to increase or- to decrease the
contrast level.
GEOMETRY :
-V-size
Repeatedly press < or > until the
symbol changes color. Press
+ to increase or – to decrease the vertical size of the display.
-V-position
Repeatedly press < or > until the symbol changes color. Press
+ to move up or – to lower the vertical position of the display.
-H-width
Repeatedly press < or > until the symbol changes color. Press
+ to increase or – to decrease the horizontal width of the display.
-H-position
Repeatedly press < or > until the symbol changes color. Press
+ to move screen rightward or – to move screen leftward.
-Pincushion
Repeatedly press < or > until the symbol changes color. Press
+ or – until the display edges neither bulge out (barrel) nor pull in
(pincushion).
-Trapezoid
Repeatedly press < or > until the symbol changes color. Press
+ or – until the display does not slant (trapezoid distortion).
-Balance
Repeatedly press < or > until the symbol changes color.
Making the desired adjustment by pressing the keys + or – to
adjust the balance of the display.
-Parallelogram