User's Manual

4
OPERATION
All the adjustments are controlled by a Rotary Encoder located on the
right front side. See Figure 4. User could make a good appear-ance of
the monitor to suit your personal preference by the Encoder.
Figure 4 Power Switch and Control Knob
Front Panel Descriptions
MAIN Power( ): To turn on or off the monitor.
Power Indicator: Lights up when the power is ON.
Rotary Encoder: To control functions of the monitor.
Rotate to switch the function or adjust function scale. Press to select a
function or execute function.
Auto-Calibration Registors: It allow you to increase or
decrease the size (height and width), Quickly. If hothing happeus when
this Function already at full size.
Auto Save Function
The monitor provides an auto save function. After you have changed
any of the settings and waited for about 10 seconds, the new values will
be saved in the monitor's non-volatile memory. They are stored even if
you switch off the monitor.
On Screen Display (OSD) Message
The OSD is a message that displays on the monitor screen. The OSD
message can show the function scale and the mode's frequency. When
user does not press key at 10 seconds later, the OSD message is been
off.