User's Manual

How to Adjust a Setting

The OSD provide 3 pages menu:

a. Geometry / Lumina

b. Color

c. Other

Select symbol go to next page.

Select symbol go to previous page.

Select symbol to exit the OSD menu.

1. Press the Encoder to show the OSD window.

2. Rotate the Encoder to switch the desired function. See figure 5.

3. Press the Encoder again to select the function that you want to

adjust.

4. Rotate the Encoder to change the adjustment of the selected

function.

5. If you do not change any other setting, the OSD window will go out

after approx. 10 seconds and the new setting has automatically

been saved. If not, then you can select the symbol and press the

Encoder to end adjustment.

If you like to adjust other functions, repeat steps 2~5.

Figure 5 The OSD Message

Function and Description of the OSD

I. Geometry / Lumina

1. Contrast:

To adjust the picture contrast on the display.

2. Brightness:

To adjust the picture brightness of the display.

3. V-size:

To adjust the vertical size of the display.