Installation Guide

Installation

Part 1: Placement

• Place the air conditioner on a flat surface and near a power supply outlet at least 12 in. (30 cm.)

away from any wall or object that could block the airflow (See Fig.7).

• Socket wiring should be in accordance with the local electric safety requirements.

Part 2: Exhaust Hose Installation

• Twist both ends of the exhaust hose into the square fixing clip and the flat fixing clip.

• Insert the square fixing clip into openings at back of the air conditioner (see Fig.8).

• Put the other end of the exhaust hose to the near windowsill.

Part 3: Window Slider Kit Installation

• The window slider kit can be installed horizontally or vertically.

• Open the window and place the window slider on the inside edge of the window.

• Adjust the window slider to the width of the window.

• Fig. 9 and Fig. 9a shows the minimum and maximum size for the window slider kit.