Use and Care Manual
INSTALLATION
Part 1: Placement
• Place the air conditioner on a flat surface and near a power supply outlet at least 12 in. (30 cm.)
away from any wall or object that could block the airflow. (See Fig.7)
• Socket wiring should be in accordance with the local electric safety requirements.
Part 2: Exhaust Hose Installation
• Twist both ends of the exhaust hose into the square fixing clip and the flat fixing clip.
• Insert the square fixing clip into openings at back of the air conditioner (see Fig.8).
• Put the other end of the exhaust hose to the near windowsill.
Part 3: Window Slider Kit Installation
• The window slider kit can be installed horizontally or vertically.
• Open the window and place the window slider on the inside edge of the window.
• Adjust the window slider to the width of the window.
• Fig. 9 and Fig. 9a shows the minimum and maximum size for the window slider kit.
5