Use and Care Manual

MACHINE MAINTENANCE
8
Drainage
The internal water tank in the air conditioner has one water level safety switch that controls water
level. When the water level reaches an anticipated height, the water full indicator lamp lights up.
NOTE: If water pump is damaged, drainage can be performed both manually and continuously.
To drain manually:
1. Turn off the power to the unit and unplug.
2. Place a water tray under the drainage port to collect water.
3. Remove the rubber drainage plug.
4. Replace the plug, when drainage water stops flowing.
For continuous drainage into a floor drain:
1. Turn off the power to the unit and unplug.
2. Remove the rubber drainage plug from the drainage hole at the bottom of the unit.
3. Attach the drainage hose to the secondary port.
4. Place other end of drainage hose into a floor drain.
5. Replace the rubber drainage plug after operation to prevent leaks.
Cleaning the unit
1. Turn off the power to the unit and unplug.
2. Wipe down unit with a soft, dry, or damp cloth. A mild detergent can be used.
3. Never use a volatile substance such a gasoline or abrasive cleaners.
4. Do not splash water onto the unit.
WARNING: Before maintenance, turn the power switch off and disconnect the
power cord from the wall.