Owner's Manual ES-910/1310 LAMINATOR Página en Español 9 Page en Français 17 Please read and retain these instructions. To register your product, please go to www.royalsovereign.com USA. Click the Customer Support Tab then Registration Tab. www.royalsovereign.com Royal Sovereign International, Inc.
LAMINATOR
ES-910/1310 safety instructions The safety recommendations outlined in this section should be read and understood before operating this machine. When using this machine follow these basic safety precautions to reduce risk of fire, electric shock or injury. Keep this information for future reference. 1. To prevent the possibility of a fire or injury, do not allow foreign articles inside the machine. 2. Do not attempt to laminate items that exceed total recommended material thickness. 3.
CONTENTS Box Contents∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5 Parts∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5 Controls∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5 Features∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5 Operation∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 6 Troubleshooting∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7 Specifications∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7 Warranty∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 8 Contact Information∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 8 Página en Español∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙
ES-910/1310 BOX CONTENTS Laminator and pouch film Reverse switch PARTS Control Panel Adjustable cooling guides Front opening CONTROLS FEATURES 5 mil film setting Power button Setting control 3 mil film setting Cold lamination setting Hot and Cold Lamination The laminator can easily be adjusted to handle both hot and cold lamination pouch film. Temperature Control Individual settings for different film thicknesses from 3-5 mil.
OPERATION Hot Lamination 1. Place the machine on a flat, sturdy surface and press the power button to turn on the machine. 2. Pull out the cooling guides. 3. The machine is preset to the 3mil setting. To change the setting press the setting control button. The machine will take approximately 5 minutes to warm-up. When the proper temperature is reached, the ready light will glow steady. 4. Place the item to be laminated into the laminating pouch. 5.
ES-910/1310 Troubleshooting Symptom Motor does not work. Pouches are not laminating correctly. The pouch is jammed. Solution Check to make sure machine is plugged in. Check to make sure the power button is turned on. Make sure that the machine is set to the correct hot setting. Press down the reverse switch and the pouch will exit the front of the machine. If you are still having complications, please contact Royal Sovereign’s Service Center at 1-800-397-1025. SPECIFICATIONS Model ES-910 ES-1310 14.
LIMITED ONE YEAR WARRANTY This warranty applies to repair or replacement of product found to be defective in material or workmanship for one year from the date of the original purchase. This warranty is extended only to the original purchaser. This warranty does not apply to damage resulting from abuse, misuse, or improper maintenance of damage that is attributable to acts of nature. Royal Sovereign International, Inc.
ES-910/1310 Español Manual del Propietario ES-910/1310 LAMINADORA Página en Español 9 Page en Français 17 Por favor lea y conserve estas instrucciones. Para registrar su producto, visite el sitio web www.royalsovereign.com USA. Haga clic en la pestaña de “Customer Support” y después en la pestaña de “Registration”. www.royalsovereign.com Royal Sovereign International, Inc.
LAMINADORA 10
ES-910/1310 INSTRUCCIONES DE SEGURIDAD Se deben leer, comprender y seguir las recomendaciones de seguridad descritas en esta sección antes de utilizar esta máquina. Cuando utilice este equipo siga estas precauciones básicas de seguridad para reducir el riesgo de incendio, descargas eléctricas o lesiones. Conserve esta información para referencia futura. 1. Para evitar posibles incendios o lesiones, no introduzca objetos extraños en la máquina. 2.
CONTENIDO Contenido de la caja∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 13 Partes∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 13 Controles∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 13 Características∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 13 Operación∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 14 Resolución de problemas∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 15 Especificaciones∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 15 Garantía∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 16 Información de contactos∙ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 16 Página en Español ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙
ES-910/1310 CONTENIDO DE LA CAJA Laminadora y la bolsa de laminación Interruptor hacia atrás PARTS Panel de control Guía ajustable de enfriamiento Abertura delantera CONTROLES Ajuste de película de 5 mil Encendido Control de la configuración Ajuste de película de 3 mil CARACTERÍSTICAS Configuración de la laminación en frío Laminación en Calienta y en Frío La máquina puede ajustarse para manejar bolsas de película de laminación fría y caliente.
OPERACIÓN Laminación en Caliente 1. Coloque la máquina en un piso, superficie resistente y pulse el botón de encendido para encender la máquina. 2. Extraiga la guía de enfriamiento. 3. La máquina está preseleccionado para el ajuste de película de 3 mil. Para cambiar la configuración pulse el botón de Control de la configuración. La máquina tomará unos 5 minutos para alcanzar la temperatura necesaria. Cuando alcance la temperatura adecuada, la luz de reparación se encenderá continuamente. 4.
ES-910/1310 Resolución de problemas Sintoma EI motor no funcione. Las bolsas no están correctamente laminación. La bolsa está atascado. Solución Asegúrese de que la máquina esté conectada pulg. Verifique que el interruptor de control se ha vuelto a caliente o frío. Asegúrese de que la máquina está configurada para la caliente. Presione el interruptor y revertir la bolsa va a salir la parte delantera de la máquina.
GARANTÍA LIMITADE DE UN AÑO Esta garantía se aplica a la reparación o al reemplazo de productos defectuosos en material o mano de obra durante un año a partir de la fecha de la compra original. Esta garantía sólo se extiende al comprador original. Esta garantía no se aplica a daños que resulten del abuso, uso indebido, mantenimiento inadecuado o daños fortuitos. Royal Sovereign Internacional, Inc. (y sus empresas afiliadas) no es responsable de los daños incidentales o indirectos de ninguna naturaleza.
ES-910/1310 Français Manuel du Propriétaire ES-910/1310 PLASTIFIEUSE Página en Español 9 Page en Français 17 Lisez et conservez ces instructions pour utilisation ultérieure. Pour enregistrer votre produit, veuillez vous rendre à www.royalsovereign.com – É-U Cliquez sur l’onglet Customer Support (Service à la clientèle) - ensuite Registration (Enregistrement). www.royalsovereign.com Royal Sovereign International, Inc.
PLASTIFIEUSE 18
ES-910/1310 CONSIGNES DE SÉCURITÉ Les recommandations de sécurité décrites dans cette section doivent être lues et comprises avant l’utilisation de cette machine. Lorsque vous utilisez cet appareil, prenez les précautions de sécurité de base suivantes afin de réduire les risques d’incendie, d’électrocution ou de blessure. Gardez ces informations comme référence. 1. Afin de prévenir les risques d'incendie ou de blessure, n’insérez pas des objets étrangers dans l’appareil. 2.
CONTENU Contenu de la boîte∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 21 Pièces∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 21 Commandes∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 21 Caractéristiques∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 21 Fonctionnement∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 22 Dépannage∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 23 Spécifications∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 23 Garantie∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 24 Coordonnées∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 24 Página en Español ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 9 Pag
ES-910/1310 CONTENU DE LA BOÎTE Plastifieuse et pouchette Inverser passer PIÈCES Panneau de commande Rails réglable de refroidissement Ouverture frontale COMMANDES Réglage pour un film de 5 mil Bouton d'alimentation Contrôle de réglage Réglage pour un film de 3 mil CARACTÈRISTIQUES Réglage de plastification à froid Plastification à Chaud et à Froid Plastifieuse peut facilement être adapté pour gérer les deux à chaud et à froid laminage pochettes.
FONCTIONNEMENT Plastification à Chaud 1. Placez la machine sur un plat, surface solide et appuyez sur le bouton d'alimentation pour allumer la machine. 2. Sortez le refroidissement des guides. 3. L'appareil est réglé à la 3mil. Pour changer le réglage appuyez sur le bouton de réglage. La machine prendra environ 5 minutes pour se réchauffer. Quand la température appropriée est atteinte, le voyant ready s’allume en continu. 4. Placez le document dans la pochette à plastifier. 5.
ES-910/1310 Dépannage Symptôme La machine ne fonctionne pas. Pouchette ne sont pas correctement la stratification. La pochette est bloqué. Solution Assurez-vous que la machine est branchée. Assurez-vous que le commutateur est à chaud ou à froid. Assurez-vous que la machine est configurée au chaud. Appuyez sur le commutateur et inverser la valise diplomatique pour quitter le devant de la machine.
GARANTI RESTREINTE DE UN AN Cette garantie s’applique au remplacement ou à la réparation du produit défectueux, soit en matériel ou en qualité d’execution pendant un an a partir de la date de l’achat original. Cette garantie est allongee pour l’acheteur original seulement. Cette garantie est nul et sans effets s’il y a abus, mauvais usage, entretien incorrecte ou dommage attribue en cas de force majeure. La Royal Sovereign International, Inc.