Owner`s manual

6
CONTROLS
FEATURES
Automatic Self-Test
The machine will automatically perform a self-test when it is turned on. If there is a problem, the preset display will show an error code.
(See ERROR CODE DISPLAYS)
Automatic Start
The machine is programmed to automatically start counting bills once placed into the hopper.
Ultraviolet Counterfeit Detection
Counterfeit bills often use white or bleached paper, which will glow under ultraviolet light. To use ultraviolet counterfeit detection, press
the “FUNC”button. The UV mode indicator will turn on showing that function is on.
Infrared Counterfeit Detection
Infrared light is used to measure the width of the center of each bill. The light will detect if there is an odd-sized bill. To use infrared
counterfeit detection, press the “FUNC” button . The IR mode indicator will turn on showing that the function is on.
Magnetic Counterfeit Detection
There is a presence of magnetic components that are standard in authentic bills. The magnetic sensor detects for the magnetic
components. To use magnetic counterfeit detection, press the “FUNC” button. The MG mode indicator will turn on showing that the
function is on.
External display
Allows the LED display to be turned to be viewed from different angles to easily see how much money has been counted.
1. [ADD] to count the bills in adding
2. [FUNC] to select the detector between MG, UV and IR
3. [PRESET] to count the bills in batch
4. [-] to subtract the batch counting number by units digits
5. [+] to add the batch counting number by units digits
6. [RESET]to clear zero and to restart
FUNC RESET
UV MG IR
D D
BAT
ADD
PCS
COUNT
8888
888888
ADD
PRESET
Control panelWorking mode indicator
Count display
Batch/add display