Use and Care Guide

6
PRODUCT OPERATION
1. Attach power cable to back of machine, plug into a three prong outlet, and turn power switch on.
- The unit will conduct an automatic self-diagnostic test to ensure accurate counts.
- After five seconds, the screen will display a "0" on the left and on the right of the display with the
word "AUTO" above the zeros.
- If there is a problem, the preset display will show an error code. (See ERROR CODE DISPLAYS
-LOCATED ON PAGE 10.)
2. Select bill counting settings: Before counting, select counting settings that are related to your counting
needs:
- ADD mode:
To continuously add totals for a cumulative total when counting press the "CF" key on the control
panel, then the "ADD" button on the keypad (#1 on the keypad). Press the "CF" key then the "ADD"
button to cancel the add mode.
- BATCH mode:
The machine is preset to common counting mode, which automatically counts all bills placed into the
hopper. To count bills in predetermined batches, press the "BATCH" button. To clear the batch
function and return to original bill counting, press the "CLEAR" button.
• Press once for a batch quantity of 10
• Press twice for a batch quantity of 20
• Press three times for a batch quantity of 25
• Press four times for a batch quantity of 50
• Press five times for a batch quantity of 100
• CUSTOM BATCH MODE - Select the "BATCH" button, and use the numeric keypad to enter a
batch number between 1 and 999
- Bill Counting Speed:
Press the "SPEED" button on control panel and continue to press the key until you come to speed
setting you wish to use (800, 1,200, 1,600, 1,900).