Use and Care Guide

7
PRODUCT OPERATION (CONTINUED)
3. Place bills into the hopper to begin counting; press "RESTART" if in manual mode
- Counterfeit Detection Methods
Ultraviolet and Magnetic Counterfeit Detection Methods are automatically on when the unit is powered
up. To manually turn off any or all methods see (CONTROL PANEL - LOCATED ON PAGE 5.)
- AUTO or MANUAL Start
The machine is preset to automatically start counting bills once placed into the hopper. To change to
the manual start mode, press the "CF" button and then the "AUTO" button (#2 on the numeric keypad).
MNL will appear on the display. Insert the bills into the hopper, and press "RESTART" button. Press the
"CF" button and then the "AUTO" button (#2 on the numeric keypad) to return to Auto mode.
- Bill Counting Mode
The bill counting mode is preset on type 2. To adjust the counting mode, press "SET" twice. Preset
display window will display "F". Use the keypad to select a type 1-3.
• Type 1 will not count counterfeit or irregular bills and stop counting to allow the removal of
bill(s) in question, and allow re-insertion of all bills into the hopper to restart counting from
zero.
• Type 2 will stop counting when a counterfeit or irregular bill is detected and include these
bills in the master count (shown on the count display).
• Type 3 will count counterfeit or irregular bills and continue counting, unless there is a jam
error (either EA2, two or more bills counted as one, or EA3, part of one bill overlapping
another bill), in which case the count may be inaccurate. In this case, bill(s) in question are
counted, and the machine will stop to allow re-insertion of all bills into the hopper to restart
counting from zero.