Owner`s manual

RSL-2702
1099
Terms
1. Initial display status.
It displays you the last working condition
when turned on.
2.
Is displayed when the preset temperature is
reached.
3.
Blinking Indicates to wait till blinking stops.
Current temperature is higher or lower
than the preset temperature.
4.
Saving electricity status.
5. Temperature
1) Shows the preset temperature.
2) You can check the current temperature
on the hot rolls by pressing T-Check.
6. Speed
9 different speed option.
(SPEED1-> 0.3m(0.98ft)/min.
SPEED9-> 2.5m(9.52ft)/min.)
You can choose from 1 to 6 for Cold Function.
You can choose speed 1 for FOAM BOARD
laminating
7. PRGM
9 different memory cell (address).
You can memorize 9 different working
conditions.
8. INSTRUCTIONS FOR CONTROL PANEL
We designed this machine standing by user's convenience. You can manipulate
speed and temperature of rollers each by each by the LCD controller. And with
memory function, you don't need to set machine every time you laminate
8.1. LCD WINDOW