Owner`s manual

2. Use the memorized working condition.
1).Operator can choose one of 9 memorized working
conditions.
2).Press then or to
select a working condition. The display will blink.
3).After the blinking stops, it is set the working condition you
selected and shows the working condition on the display.
1413
RSL-2702
1. Memorize working condition.
1).Operator can memorize 9 working conditions.
2).Choose working condition by pressing and
button after pressing button. and
speed,press button.
3).It is memorized if buzzer is ringing with blinking.If you
change the temperature or speed when LCD screen is still
blinking, you have to press button after changing.
4).When you memorize another working condition,
you can do above 2 and 3 operation over.
Memorizing Working condition and Using the
memorized working condition
1.You can do cold lamination with this function.
2.Press the button to show
"Cold" on the display.
3.Speed will always show 1.
4.Speed can be varied 1 or 6 by selecting
button.
5.You release the machine from cold mode by
pressing button.
6.Everytime you press the button, buzzer is ringing.
7.ST/BY mode is not working at COLD mode.
1.When you press button, the present temperature
will be shown on the screen and will blink five times.
2.After this, it automatically returns to the previous state.
Check current temperature on the hot rollers
Cold mode
(Saving Electricity while you are not operating for a while.)
1. When press button will display
on the screen and STND-BY mode is set at 80°C.
2. When machine is in mode, machine
condition wouldn't work. Press the button
and it will revert to the previous working.
3. When machine runs, you can't change it to the
mode.
In this case, press the button and turn
the machine to the mode.
STND-BY