INDUSTRIAL D I V I S I O N A N I M A L D I V I S I O N L I V E S T O C K TECHNOLOGY USER MANUAL Firmware version: 17 - LOTS
CE conformity declaration The manufacturer declares that the I-Read scanner complies with the requirements prescribed by the following European regulations: 73/23/EEC, 93/68/EEC and 89/336/EEC. In particular, the following standards were used to verify the compliance described in the preceding point: -ETSI EN 300 330-2 V1.3.1 (04/2006) -ETSI EN 300 330-1 V1.5.1 (04/2006) -EN 301 489-1 V1.8.1 (2008) -EN 301 489-3 V1.4.
1. Introduction 2. Quick use guide I-READ is a portable reader for the scanning of RFID tags compliant with the ISO standards 11784 and 11785. I-Read supports the FDX-A, FDX-B and HDX protocols and is powered by a 9V battery. The information relative to the ID of the scanned tag is available directly on a color display and can be downloaded to a PC through a USB cable. It is also possible to associate some aliases to the different tags scanned.
7. To scan the transponder. Press the scanning button (see page 4) depicted to the side. Two red LED flash alternatively. When the transponder is read the buzzer emits a warning sound. The transponder is associated to the lot which has been selected as shown later 9. Battery charge level indicator.
3. Menu functions 3.3 Memory report 3.1 Choice of LOT The "Choice of lot" function allows to display the list of the available LOTS and to choose a lot which will be displayed on the main screen By pressing the Selection button once, the function "Choice of lot" will be displayed. By pressing the scanning key you will be able to see the list of the available LOTS and to move forward or back in the list until the desired lot is selected.
3.5 Erase memory 3.6 Energy save/Full power The "Erase memory" function deletes all of the codes saved previously By pressing the Selection button memory” will be displayed. By pressing the reading button five times, the function “Erase The "Full Power" function leads to high-quality display using the colour display screen in the background. The "Energy Save" function causes passage to the monochromatic display with a notable battery saving. , data will be erased.
4. Download the Mass Storage mode data By connecting the USB cable to the PC, a window with the file CODE.txt containing the list of the scanned codes opens automatically. The meaning of the other files present (ALIASDEC.CSV and ALIASHEX. CSV) is specified in section 5. The text format allows you to easily export the codes for storing in the database.
The following table illustrates in detail the meaning of the various messages that can appear on the scanner’s display. MESSAGE MEANING Saved45alias Attests to the success of the operation of the assignment of the aliases and specifies the number of aliases correctly assigned(45 alias in the example image).
Assignment of 2 aliases by sending all 64 hexadecimal bits to the device, indicating APPEND mode. 6. Insertion of the custom LOTS To be able to insert the custom lots it is enough to create a text file (.txt file) on your PC that has within it a syntax as reported in section 6.1. When a tag with an associated alias is scanned, an image as indicated to the side will appear on the display.
The resultant text file will appear like in the example below: 6.3 Troubleshooting Mistakes can arise in the custom lots assignment. If the syntax "H","ERASE" or "H","APPEND" is not respected, the generated text file will not be uploaded to the I-Read mass memory without an error message being displayed. where 3 custom LOTS have been created with the "APPEND" option. 6.
ROYAL TAG SA Via Industria, 1 6933 Muzzano - CH tel +41(0)91 610 20 80 fax +41(0)91 610 20 81 contact@royal-tag.com www.royal-tag.