User`s guide

Chapter 9: Maintenance and Options
96 Alpha 600/601 User’s Guide
To install or replace the batteries
1 Before you start, make sure you have 3 new AA batteries.
2 Open the Journal Compartment cover. Remove the cover and put it
aside.
3 Move the paper roller up and out of the way. Grab the small handle on
the right of the print roller. Push the little handle towards the back of the
cash register and raise the roller bar up. You see a slope down to the
paper compartment. The battery cover is located under the print roller
bar, on the slope.
4 Remove the battery cover. Press the edge at the
top of the cover and push to the back. The cover
pops off.
5 Put the batteries in the slots. Make sure that the
positive and negative ends are in the right place.
The batteries have a little plus (positive) and
minus (negative) sign on each end to help you.
6 Replace the battery cover. Slide the bottom tabs into the long slit in the
bottom position and it snap the cover into place. Do not put the tabs in
the 2 holes in the bottom of the compartment. The cover will not close
and you will break the tabs.